So, I want to order coin supplies and order all at once to not pay more in shipping. But every time I think I've settled on a system I find out about more here from you guys. I've really enjoyed reading in my world coins post about options for a big, less valuable collection, but if you wouldn't mind sharing your methods and why you like them I'd love to hear about it. Anything from cardboard to saflip/other plastic flips to capsules, binder pages or boxes, and why you like it. So far I'm thinking cardboard 2x2s for "junk box world coins", mylar flip for $5 and up coins, maybe capsules or those intercept plastic 2x2 flips for $15-20 and up coins. I would love binder pages, but I'm a little anal about order and they might not withstand moving things regularly. Any advice, input, or wisdom appreciated. Thank you!
I use the mylar saf-flips for all my coins. Just my personal preference. I know they are kinda expensive given that most of my collection is face value. I do like that I can print a square card to go in the second pocket with the coin's information. I also have a few of the display pages where my ancients currently reside in their saf-flips. It really is up to you though, there's not really a wrong way to do it. Just get them into something to protect them. Also remember, you are free to change your mind about how you are storing them later.
I've researched this topic to exhaustion. If you search this forum you will find a lot of discussions about it. So I will save you the time, here is the basic information: 1. If you store your coins in flips, as I do, you have to use flips made of polyester, polypropylene or polyethylene (aka - Mylar). These flips are archival safe (long term storage) and often used by museums. Brand names are SAFlip or Coretek; other companies make them as well. For binder pages I recommend BCW Pro or Guard House Shield also made from the same archival products. 2. Never use any flips, binder pages, or hard plastic cases that are made of PVC, Vinyl or Unplasticized PVC. This material will ruin your coins over time. 3. The cardboard coin storage boxes are fine as long as your coins are in flips. Don't leave "bare" coins in the box because overtime the chemicals used in the adhesives and binding material can damage your unprotected coins. 4. Only use acid free, also referred to as archival, paper for your flip inserts. P.S. I just saw an old thread, from about 10 years ago, in which one of the members contacted a well know museum numismatist to get their advise. It listed a lot of technical information and good advice. I tried to search for it again but couldn't find it, perhaps one of the moderator's can provide a link.
I appreciate that sentiment, but be aware that if you collect coins long enough, you’ll probably make changes in how you store them. I’ve completely revamped my approach to coin storage at least three times, with numerous smaller adjustments along the way. It has usually happened in tandem with rethinking the focus of my collection. Just go with something now that fits your budget and your priorities. The most important thing is to get some kind of protection for your coins. It’s been said here before but bears repeating: If a coin is worth keeping, it’s worth protecting.
We have all struggled with this topic at one point or another. After some years of experimentation, I've settled on using SAFlips for all but my most expensive coins. So many people over the years have recommended them to me that I finally relented. I put my coins into 2X2 SAFlips (I've had no use for the larger size yet), then into Intercept Boxes that hold 2X2 flips. I've found this makes for easy storage and perusal. Others have told me that SAFlips can age and crack over time, so they may need replacing at some point in the future. I probably haven't used them long enough to experience this yet, so I can't verify. At one time, I put pretty much everything into Air-Tite capsules. These provide plenty of protection, even against dropping, but they really don't make sense for extremely common or inexpensive coins. Plus, medieval and ancient coins, with their often irregular flans, don't really work in them (I'm collecting mostly ancients now). But if you pay a decent amount for a coin, and it has a regular sized flan, an Air-Tite will definitely protect it. Good luck!
I use mylar holders made by guardhouse for almost every thing. I moved away from cardboard holders because of an unfortunate staple incident. They do get a bit brittle, but it takes a while for that and as long as you aren't opening them a hundred times, they should be fine. I have moved to a mostly certified collection, but for really standout valuable pieces you can get self slabs, but they are much more expensive. My coins in flips are in simple pages designed to hold them and the pages hold up well to removing the flips.
Polyester is Mylar (tradename) polypropylene and polyethylene are a whole nother thing. Museums have also (perhaps in times past) been known to remove their coins and polish them so they shine real purty!
storage/long term and higher value coins have led me to do most of my collecting in slabbed coins, stored in high end (UrsaMinoris) cases (they stack nicely) do I still have boxes of cardboard 2x2s and more boxes of mylar flips and dozens of albums as well... I couldn't begin to store it all in a SDB so I ended up with a large safe bolted to the floor a decent sized dog and an obscenely large hand gun (454 casul, no doubletap needed) That and i live in a state that allows me to use said boomstick
The 2x2's with cardboard are suitable for most "common" coin use (You decide what is "common"). I usually leave them unstapled and just fold them over and insert into the page of 2x2's. Nice coins get a Mylar flip. BTW, you can write right on the cardboard 2x2.
So I have been keeping uncirculated quarters with die breaks in Air-Tite capsules and then placing them in 2x2 looseleaf binder pages, but they fall out because they are a bit too thick and/or heavy. Are there any suggestions as to how to secure those pockets to prevent the coins from slipping out? Or is there a better way to store encapsulated coins?
I'm relatively new to this due to fortunate circumstances, an inherited hoard. I hate the cardboard flips that need staples, the silver dollars don't have enough border to staple properly. This is for not rare coins, not masterpieces. Where can I order the same type of holder that glues its self down without the need for staples A one time seal. No reuse, I hate staples.
I've seen some binder pages meant specifically for capsules at coin collecting supply websites. They are a bit expensive, but the seem useful for your system. Most I've seen fit one size and you can buy pages to fit different size capsules.
Everything takes up space. If you can minimize clutter and needles non coin packaging all the better. You could always buy a bigger or second safe.
Check out Wizard Coin Supply at this link: Wizard Coin Supply They have just about any coin collecting supply you will need. Scroll down to the self adhesive 2x2's by Supersafe, Lighthouse or BCW.
